Melburg Luft

Hi all,

I’m in need of a bolt on aftermarket cam gear in +2
Or a used stock 3 rivet cam (113-109-025D) in +2 cam gear and I’ll drill it off.
I might be able to get away with a +3 but I haven’t got one to check with.

I’m in Hoppers Crossing

Cheers Leon

I just found my old cam and it has a +2 gear on it (I knew I had another cam hiding in the shed, but had no ideas which gear size it had).
I’d still prefer an aftermarket bolt on, rather than spending $50 on a big drill bit just to grind it flat to make the appropriate holes in a stock gear.

Or if anyone know where I can purchase a new +2 bolt on gear, please let me know. I’m after 50 tooth 1200-1600 Not 36h stuff.

Cheers
Leon

I’m not to savvy with cam gears but do have 1 or 2 amongst my junk..
Got a pic showing what you want.?
Also what’s wrong with yours..?

Tonz Magonz wrote:I’m not to savvy with cam gears but do have 1 or 2 amongst my junk..
Got a pic showing what you want.?
Also what’s wrong with yours..?

I’m not at home right now but I have an aftermarket cam with an Empi bolt on gear like this pic from the net (which I’m pretty sure is a 0) But it has too much lash and a +2 came out of this case which is on it’s first line bore.



I’m currently looking for a suitable drill bit/end mill so I can modify the VW stock riveted +2 gear I have.

Sooooo the +2 gear I have has a crack in it. Lucky I cleaned it up beforehand.

So I still need a +2 bolt on cam gear or an old 3 rivet cam with good +2 gear.

Cheers
Leon

Cool..

I'll have a look..